PRECISION SHARPENING · KENTWOOD, MI
Good tools.
Great edges.
From your kitchen to the production floor.
Put a better edge on what you already own.
BACK TO WORK
There’s more life
in that edge.
Before you replace it, let’s see what sharpening can do. Find your tool, check the guide price, and choose how to get it to the shop.
Carbide saw bladesAsk for a quote
CNC sharpening for the blades you rely on, from the home workshop to the production floor.
A 10-inch, 80-tooth blade is listed at $28 as a pricing example.HSS cold sawsAsk for a quote
Precision sharpening for metal-cutting blades. Advice on blade selection and tooth count is available for your application.
Shop visits for blade advice are offered on the original site.Router & Forstner bitsAsk for a quote
Forstner bits are sharpened and tested. Spiral up-cut, down-cut and compression router bits are serviced with specialist machinery.
Call with the type, diameter and condition of your bit.Mower blades$10–12
Give your lawn a cleaner cut. Sharpening helps a dull blade cut the grass instead of tearing it.
Published price varies with wear.Chainsaw chainsFrom $10
Four decades of chain-sharpening experience, for a chain ready to get back to work.
Remove chains from the saw before bringing them in. Price depends on length.Ice auger bits & yard toolsAsk for a quote
Sharpening for ice auger bits and the yard tools that work hard through every season.
Remove auger bits before drop-off. Electric/gas hedgers are listed at $30.Kitchen & hunting knives$5–10
The right edge for the task, whether you cook at home, work in a restaurant or head outdoors.
Kitchen knife pricing depends on blade length. Ask about other knives.Scissors & drill bits$7 / from $3
Small tools deserve a good edge too. Bring in everyday scissors and dull drill bits.
Scissors $7. Drill bits from $3, depending on diameter.Guide prices from Bill’s published price list. Condition, size and repairs can affect the final quote.
Original price listA familiar blade.
A fresh start.
Sharpening can make good tools go further. Bill’s lists a 10-inch, 80-tooth saw blade sharpening at $28, with the final cost confirmed by the shop.
Ask about current Freud offers
FROM THE BILL’S SHARPENING WORKSHOPBUILT AROUND THE EDGE
Serious machines.
Careful hands.
CNC precision is only part of the process. From the first inspection to the final check, the people at Bill’s make sure the edge is ready for the job.
The shop expanded into its Division Avenue location in 2022, with continued investment in specialist equipment.
on the Vollmer CHX1300
Inside the shop
ABM Premium Robot
Automated carbide sharpening with overnight robotic loading.
Vollmer CHX840 / CHX1300
Carbide blades up to 840 / 1,300 mm; face guide notching and chip-breakers on the CHX1300.
UTMA AL805
Carbide blade sharpening up to 805 mm.
Loroch K850T / Powerstar 850
HSS blades up to 850 mm with A, B, BW and C grinds. K850T also supports chip-breakers.
UTMA LC25 × 2
Machining for spiral up-cut, down-cut and compression CNC router bits.
Hurco KM3P
CNC vertical milling for blade boring and pin-holing.
Plus dedicated side grinders, notchers, drill and chain grinders, and a Burr King mower grinder.
Technology is good.
People make it count.
Meet Alan, Chris, Brian, Bryce, Steve and Roy on Bill’s team page. Their shared focus is the quality of the finished tool.
Meet the teamFreud / Diablo distributor and certified sharpener. Blades, router bits, planer knives and other tooling are available through the shop.
Explore their suppliersFROM YOUR BENCH TO OURS
A better edge.
A box away.
Not local? Bill’s accepts mail-in sharpening. Send five or more saw blades and the shop covers return shipping.
- 01
Choose your tools
List the type and quantity that need attention.
- 02
Pack with care
Use the official mail-in instructions and order form for a real shipment.
- 03
Back to your bench
The shop’s stated turnaround goal is within one week. Confirm timing before sending.
Your tools. One request.
Prepare everything online, from tool details to your return address.
- 01Tell us what’s coming
Tool types, quantities and condition notes.
- 02Add your return address
Your contact and shipping details, together.
- 03Review, approve, pay
Follow the request through a quote and payment preview.
Interactive demo. Use sample details. No real order or payment is created.
A few things
before you send.
Should I sharpen or replace my blade?+
It depends on the tool’s condition. Bill’s can assess the blade and advise on repair, sharpening or replacement. The shop also supplies new tools.
What should I remove before bringing tools in?+
Remove chains from chainsaws and remove auger bits from the auger before drop-off. Ask the shop for packing instructions for your tools.
Do you work with commercial shops?+
Yes. Bill’s serves manufacturers and individual fabricators as well as local restaurants and homeowners. Contact the shop about blade selection, tooth count and service requirements.
Is there a veteran discount?+
The official website advertises a 10% discount for veterans every day. Confirm the details with the shop.
Can I place an order on this website?+
This is an independent design concept. The intake flow simulates an order, quote approval and payment. Nothing is sent or charged. Use Bill’s official website or call (616) 784-1755 for actual service.